Frequency response data-based peak filter design applied to MIMO large-scale high-precision scan stage

A large-scale high-precision scan stage is important equipment in the industrial productions of micro-fabrication such as flat panel display (FPD) lithography systems. Designing controllers for multi-input multi-output (MIMO) systems is time-consuming and needs experience because of the interaction between each axis and many controller tuning parameters. The aim of this study is to develop a peak filter design method based on frequency response data to reduce repetitive disturbance. This data-based approach does not use the model and only uses the frequency response data of the controlled system and the disturbance spectrum calculated from the scanning error data (Contribution 1). The peak filter is designed by convex optimization and satisfies robust stability conditions for six-degree-of-freedom systems (Contribution 2). The control performance of the designed peak filter is experimentally demonstrated with an industrial MIMO large-scale high-precision scan stage in reducing the scanning error of the main stroke of the translation along the $x$-axis (Contribution 3).     

A Role for Human Renal Tubular Epithelial Cells in Direct Allo-Recognition by CD4+ T-Cells and the Effect of Ischemia-Reperfusion

Direct allorecognition is the earliest and most potent immune response against a kidney allograft. Currently, it is thought that passenger donor professional antigen-presenting cells (APCs) are responsible. Further, many studies support that graft ischemia-reperfusion injury increases the probability of acute rejection. We evaluated the possible role of primary human proximal renal tubular epithelial cells (RPTECs) in direct allorecognition by CD4+ T-cells and the effect of anoxia-reoxygenation. In cell culture, we detected that RPTECs express all the required molecules for CD4+ T-cell activation (HLA-DR, CD80, and ICAM-1). Anoxia-reoxygenation decreased HLA-DR and CD80 but increased ICAM-1. Following this, RPTECs were co-cultured with alloreactive CD4+ T-cells. In T-cells, zeta chain phosphorylation and c-Myc increased, indicating activation of T-cell receptor and co-stimulation signal transduction pathways, respectively. T-cell proliferation assessed with bromodeoxyuridine assay and with the marker Ki-67 increased. Previous culture of RPTECs under anoxia raised all the above parameters in T-cells. FOXP3 remained unaffected in all cases, signifying that proliferating T-cells were not differentiated towards a regulatory phenotype. Our results support that direct allorecognition may be mediated by RPTECs even in the absence of donor-derived professional APCs. Also, ischemia-reperfusion injury of the graft may enhance the above capacity of RPTECs, increasing the possibility of acute rejection.     

Polynomial filtering for nonlinear stochastic systems with state‐ and disturbance‐dependent noises

This article is concerned with the polynomial filtering problem for a class of nonlinear stochastic systems governed by the Itô differential equation. The system under investigation involves polynomial nonlinearities, unknown‐but‐bounded disturbances, and state‐ and disturbance‐dependent noises ((x,d)‐dependent noises for short). By expanding the polynomial nonlinear functions in Taylor series around the state estimate, a new polynomial filter design method is developed with hope to reduce the conservatism of the existing results. In virtue of stochastic analysis and inequality technique, sufficient conditions in terms of parameter‐dependent linear matrix inequalities (PDLMIs) are derived to guarantee that the estimation error system is input‐to‐state stable in probability. Moreover, the desired polynomial matrix can be obtained by solving the PDLMIs via the sum‐of‐squares approach. The effectiveness and applicability of the proposed method are illustrated by two numerical examples with one concerning the permanent magnet synchronous motor.     

煤油气共生矿井底板油型气赋存特征及防治

为了提高煤油气共生矿井油型气灾害治理的科学性，以黄陵二矿为例，采用现场测试、钻探取芯、跟踪观测、地质分析等多种方法，研究了采掘工作面煤层底板油型气分布特征、涌出规律和运移机理，并初步探讨了底板油型气体灾害防治措施。结果表明:底板油型气涌出点多位于底板砂岩储层上倾尖灭端和砂岩透镜体附近，呈现不连续区带状分布特征，涌出的油型气主要来自富县组砂岩层，涌出的动力主要为地层流体压力差，底板油型气通过地层中存在大量的断裂和裂缝、微裂缝系统进入采掘空间，采掘扰动是底板油型气异常涌出的工程诱导因素。建议加强油型气综合探查技术、油型气灾害预测预报技术、油型气综合抽采技术和智能化矿井建设等方面的研究。     

Reference governors and maximal output admissible sets for linear periodic systems

ABSTRACT

In this paper, we consider the problem of constraint management in Linear Periodic (LP) systems using Reference Governors (RG). First, we introduce the periodic-invariant maximal output admissible sets for LP systems. We extend the earlier results in the literature to Lyapunov stable LP systems with output constraints, which arise in RG applications. We show that, while the invariant sets for these systems may not be finitely determined, a finitely-determined inner approximation, which is periodically invariant, can be obtained by constraint tightening. We then analyze the geometric and algebraic relationship between these sets and show that these sets are related via simple transformations, implying that it suffices to compute only one of them for real-time applications. This greatly reduces the memory burden of RG (or other similar constraint management strategies), at the expense of an increase in processing requirements. We present a thorough analysis of this trade-off. In the second part of this paper, we present two RG formulations, and discuss their properties and algorithms for their computation. Numerical simulations demonstrate the efficacy of the approach.     

基于滑模的运载器主动段俯仰通道姿控系统设计

与传统比例-积分-微分（PID）控制方法相比，滑模控制（SMC）方法可以比较容易地将不确定性纳入控制器设计中，从而增强系统的鲁棒性。探索了SMC技术在运载器主动段姿态控制中的工程应用，首先通过分析基于趋近律的SMC系统，提出了降低不连续切换项系数的需求，然后研究了基于干扰上界的SMC方法。三通道小偏差仿真结果验证了两种方法的控制效果，表明第2种控制器的鲁棒性更好，稳态误差小，同时发动机喷管摆角需求较小。     

Design of disturbance observer based on adaptive-neural control for large-scale time-delay systems in the presence of actuator fault and unknown dead zone

This article presents an adaptive neural compensation scheme for a class of large-scale time delay nonlinear systems in the presence of unknown dead zone, external disturbances, and actuator faults. In this article, the quadratic Lyapunov–Krasovskii functionals are introduced to tackle the system delays. The unknown functions of the system are estimated by using radial basis function neural networks. Furthermore, a disturbance observer is developed to approximate the external disturbances. The proposed adaptive neural compensation control method is constructed by utilizing a backstepping technique. The boundedness of all the closed-loop signals is guaranteed via Lyapunov analysis and the tracking errors are proved to converge to a small neighborhood of the origin. Simulation results are provided to illustrate the effectiveness of the proposed control approach.     

The periodic system and the idea of a chemical element: From Mendeleev to superheavy elements

Like other scientific concepts, the idea of a chemical element has changed considerably over time, since it was first established in the Enlightenment era. In Dmitri Mendeleev's construction of the periodic system, he distinguished between simple substances and elements as defined by their atomic weights. The foundation of the periodic system on the latter concept led to several challenges. For example, the system seemed unable to accommodate the radioactive substances eventually recognised as isotopes. Around 1920, elements were consequently redefined in terms of their atomic numbers, a nuclear property that could be determined by X‐ray spectroscopy. Although this understanding of an element has stood the test of time, new questions turned up relating to the concept of an element following the syntheses of transuranic elements since the early 1940s. These syntheses of very heavy elements have additionally led chemists and physicists to reconsider the criteria for the discovery of a new element. Recently, elements have been officially recognised on the sole ground that a small number of very heavy atomic nuclei were identified. The paper discusses how the notion of an element was modified during different periods of time, the reasons for the modifications, and the values ascribed to them in the communities of chemists and physicists.     

Tuning of Active Disturbance Rejection Control with application to power plant furnace regulation

Active Disturbance Rejection Control (ADRC) is emerging as a promising solution in dealing with the unmeasurable disturbances and unknown uncertainties, which are treated in a lumped manner and augmented as an extended state variable. Subsequently, an extended state observer (ESO) is designed to estimate and cancel the combined uncertain term in real time, modifying the uncertain plant to behave like a nominal model consisting of integrators. In the original ADRC formulation, the plant model is assumed to be of delay-free and its order is assumed to be equal to that of the real plant. However, a low-order ADRC is preferred and received a wide acceptance in practice because of its simplicity. Currently, the feasibility of such practice is not clearly revealed as well as its potential dangers. To this end, this paper analyzes the control mechanism from the perspective of the modified plant, which, in turn, would give guidance to parameter tuning. The effect of each parameter on the compensation efficiency and stability conditions of the modified plant is analyzed, based on which a complete tuning procedure for ADRC is developed where the initial settings is derived from the existing PI controller parameters. Finally, the proposed tuning method is experimentally used for a furnace pressure regulation of a 1000MW power plant, validating the feasibility of the low-order ADRC, even in the absence of both dynamic model and the information on the model order.